SeaDoo GSI Instrukcje Operacyjne Strona 86

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 105
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 85
84
Engine Misfires, Runs Irregularly
Engine Overheats
Engine Continually Backfires
Engine Pinging or Knocking
Engine Lacks Acceleration or Power
OTHER OBSERVATION POSSIBLE CAUSE REMEDY
Weak spark.
• Fouled/defective/worn
spark plugs.
Replace.
• Faulty rev limiter.
Refer to an authorized dealer.
• Too much oil supplied to
engine.
Improper oil pump adjustment, refer
to an authorized dealer.
Lean fuel mixture.
• Fuel: Level too low, stale
or water-contaminated.
Syphon and/or refill.
• Fuel filter, clogged or
water-contaminated.
Refer to an authorized dealer.
• Fuel valve partially open.
Turn fuel valve to ON position.
Rich fuel mixture
(high fuel consumption).
• Flame arrester
dirty/clogged.
Clean or replace.
• Partially closed choke.
Refer to an authorized dealer.
OTHER OBSERVATION POSSIBLE CAUSE REMEDY
Monitoring beeper sounds
continuously.
• Clogged jet pump water
intake.
Clean.
• Incorrect type of fuel or oil.
Syphon and refill.
Clogged coolant system.
Flush cooling system with coupler
hose.
OTHER OBSERVATION POSSIBLE CAUSE REMEDY
• Faulty rev limiter.
Refer to an authorized dealer.
Weak spark.
• Fouled/defective/worn
spark plugs.
Replace.
Overheated engine.
• See ENGINE
OVERHEATING.
OTHER OBSERVATION POSSIBLE CAUSE REMEDY
• Poor quality gasoline/low
octane.
Use well known quality and recom-
mended gasoline.
• Spark plug heat range too
high.
Use recommended spark plugs.
• Ignition timing.
Refer to an authorized dealer.
OTHER OBSERVATION POSSIBLE CAUSE REMEDY
• Weak spark/incorrect fuel
mixture.
Refer to ENGINE MISFIRES, RUNS
IRREGULARLY.
• Water in fuel or injection
oil.
Syphon and replace.
Overheated engine.
• See ENGINE
OVERHEATING.
smo9701a.bk : smo9701c.fm5 Page 84 Monday, November 3, 1997 9:54 AM
www.SeaDooManuals.net
Przeglądanie stron 85
1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 104 105

Komentarze do niniejszej Instrukcji

Brak uwag