SeaDoo GSI Instrukcje Operacyjne Pobierz pdf (Strona 36)

RES: Use when the watercraft has run

out of fuel in the ON position.

6) Safety Lanyard Switch

Pulling the safety lanyard from the

switch stops the engine operation. At-

tach the safety lanyard to the opera-

tor's Personal Flotation Device and

snap the cap to the switch to be able

to start the engine.

The safety lanyard cap must be se-

curely snapped onto its switch to be

fully operational.

TYPICAL

1. Safety lanyard cap on the switch

2. Safety lanyard secured on operator’s PFD

Digitally Encoded Security System

(If Equipped)

This system allows an anti-start pro-

tection against unauthorized use of

the craft. Dealer programmed, the

safety lanyard provided with your wa-

tercraft is the only one that allows en-

gine starting.

NOTE: Two short beeps must be

heard when installing the safety

lanyard cap on the switch. Otherwise,

refer to the TROUBLESHOOTING

section.

◆

WARNING

Always refill the fuel tank at the

first opportunity. After refueling,

turn the fuel valve to the ON po-

sition to continue operation.

◆

WARNING

Should the safety lanyard cap be-

come loose or fails to remain on

its switch, replace it immediately.

◆

WARNING

Should the engine be stopped,

watercraft directional control is

not available. Always disconnect

safety lanyard when leaving wa-

tercraft.

F02L2TY

smo9701a.bk : smo9701b.fm5 Page 34 Monday, November 3, 1997 9:54 AM

www.SeaDooManuals.net

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 104 105

Komentarze do niniejszej Instrukcji

Brak uwag

SeaDoo GSI Instrukcje Operacyjne Strona 36

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Silnik SeaDoo GSI